• Armada H65 Hoist

    Armada H65 Hoist

    The Scanclimber Armada H65 is a simple, robust, and reliable construction hoist. It was designed to be a cost effective solution for demanding customers. It may not have all the extras of most our expensive hoists, but it does the vertical lifting job reliably and well. time. Armada is a design of Scanclimber quality hoists with new components that simplify the hoist and make it a cost effective and very reliable product.
  • Armada Advantages

    Armada Advantages

    -Compact and modular design.
    -A special Bus Bar electric power distribution system fixed to the mast.
    -Hoist is easy to load and unload. Possibility to take advantage of full loading space of 9.6 m³ , no wasted cubic meters.
    -Frequency converter allows both smooth and stepless start/stop of the cage with a low starting current.
    -Maximum free standing lift height of 6 m.
    -Modular anchoring equipment.
  • With options more functionality

    With options more functionality

    Optionally available:
    • -Landing gates
    • -Doors
    • -Ramp
    • -Double cage version
  • 1
  • 2
  • 3

SC2032-65VL GENERAL INFORMATION

sc2032 65vl main unit

SC2032-65VL HOIST is the first model of our new Armada H65 personnel and material hoist family. It is a cost effective mid-range personnel and material transportation hoist that can carry a payload of up to 2 tonnes at a time. With lifting speed 54 m/min the hoist is faster to ascend than most other hoists on the market in its economical price range. Maximum lifting height with anchored mast is 200 m, by request the higher height is possible.

The standard cage length is 3,2 m and width 1,5 m. The hoist can be equipped with 1,5 m wide front and back doors. It is possible to use two cage in same mast, then lifting capacity can be doubled. The hoist equipped with a frequency controller (FC). It provides for smooth starting and stopping with a low starting current and less wear and tear.

Armada Hoist is not in compliance with EN12159 standard and not CE certified.

SC2032-65VL Technical Data Overview

  • Main Components
  • Technical Data
  • Options

 

Description of the SC2032-65VL main components 
  • SC2032-65VL
    SC2032-65VL
    Scanclimber SC2032-65VL can be equipped with one or two cages. The payload of each cage is 2000 kg or 24 persons.
  • Ground Station
    Ground Station
    Armada Hoists has a light ground station, typically bolted onto a concrete or similar slab. The handedness of cage can be chosen. The standard Armada Hoists ground station is equipped with one front door.
  • Cage
    Cage
    Standard cage size of an Armada Hoist is 3.2 m x 1.5 m.
  • Mast Section
    Mast Section
    Armada Hoist mast sections are hotdip galvanized which ensures their long lifetime. One section is 1.5 m tall and weighs only 133 kg.
  • Drive units control panel
    Drive units control panel
    The Armada hoist is always equipped with a frequency controller (FC). The frequency controlled motor gives smooth starting and stopping with low starting current and less wear and tear – so ensuring an extended lifetime.
  • Safety Brake
    Safety Brake
    The safety brake ensures that even in a complete breakdown of the drive unit, the cage will not fall down. A mechanical, spring-loaded safety brake is a standard safety feature in Armada hoists. It improves safety and reliability of the hoist for everyday use. The long-lasting safety brake is well protected from dirt and dust and is practically maintenance-free.
  • Drive Units
    Drive Units
    Armada 2032-65VL has three 11 kw's lifting motors with a standard speed of 54 m/min.
Technical DataSC2032-65VL
Payload 2000 kg
Cage internal length 3200 mm
Cage internal width x height 1510 x 2040 mm
Speed 54 m/min
Single or twin cage version YES
Lifting motors:
  • Mid-speed 54 m/min
YES
Power supply voltage 400 V / 50 Hz
Top drive lifting unit YES
Overspeed safety device YES
Max. lifting height, with anchored mast 200 m (higher on request)
Anchoring distance Approved to 12 m (21 m on request)
Mast section:
  • height
1,5 m
Operation temperature -25...+40°C

 

Description of the SC2032-65VL option components
  • Landing Gates and Doors
    Landing Gates and Doors
    Different landing gates and doors are available for the Armada Hoist. Most of the Scanclimber manufactured gates or doors are compatible with Armada Hoist. All the gates and floors are equipped with an interlocking system.
  • Ramp Door
    Ramp Door
    Landing level access door can be equipped with a manually or hydraulically operated 700 mm length ramp.
  • Double Cage Version
    Double Cage Version
    The possibility to use two cages at the same time.
  • Mast Crane
    Mast Crane
    The mast is easily assembled with the help of an optional mast assembly crane.
  • Ramp Door
    Ramp Door
    A ramp is available as an option for Armada hoists. The back door of the cage can be equipped with a manual ramp to enable access to the building.
  • Feel free to leave us a message if you have any requests, questions or feedback and we'll get back to you as soon as possible.

    Powered by ChronoForms - ChronoEngine.com

Mail
Contact