• Falcon H48 Hoist

    Falcon H48 Hoist

    The Scanclimber Falcon H48 is a mid-range hoist for passengers and materials offering reliability, flexibility, safety and low cost of ownership, making it a good choice for both construction and rental companies. Since its launch in 2007, Scanclimber's Falcon H48 has been at work at several sites around the world. Falcon allows single or twin cage configurations. Its design is truly modular and offers cage lengths of 2.4 m or 3.2 m and a multiple choice of doors and ramps.
  • Falcon Advantages

    Falcon Advantages

    -Compact and modular design.
    -High efficiency mast.
    -Hoist is easy to load and unload. Possibility to take advantage of full loading space of 9.3 m³ , no wasted cubic meters.
    -Frequency converter allows both smooth and stepless start/stop of the cage with a low starting current.
    -Maximum free standing lift height of 6 m.
    -Modular anchoring equipment.
  • With options more functionality

    With options more functionality

    Optionally available:
    • -Computer controlled landing control system with pulse encoders
    • -Fault diagnostic system
    • -Overload detection
    • -Double cage version
    • -Automatic hydraulic ramp
    • -Automatic rack lubrication
  • 1
  • 2
  • 3

SC2032-48 GENERAL INFORMATION

sc2032-48 front 02

SC2032-48 HOIST is the strongest hoist of our Falcon H48 personnel and material hoist family. Its lifting capacity is 2000 kg or 24 persons with lifting speed 36 m/min. Maximum lifting height with anchored mast is 200 m, by request the higher height is possible.

The standard cage length is 3,2 m but if a smaller footprint is required, hoist can equiped with a 2.4 m cage. It is possible to use two cage in same mast. Then lifting capacity can be doubled. Additionally, there is a wide variety of landing gates, doors and mast anchoring systems. SC2032-48 hoist can also be equipped with a frequency controller (FC). It provides for smooth starting and stopping with a low starting current and less wear and tear.

SC2032-48 Technical Data Overview

  • Main Components
  • Details
  • Options
  • Capacity
  • Weights and dimensions
  • Electrical Data
  • Safety Equipment

 

Description of THE SC2032-48 main components 
  • SC2032-48
    SC2032-48
    Scanclimber SC2032-48 can be equipped with one or two cages. The payload of each cage is 2000 kg or 24 persons.
  • Ground Station
    Ground Station
    Falcon's ground station is bolted on a concrete or similar slab. The handedness of the station can be freely chosen in the erection phase. The standard ground station is equipped with one (A) door but the back door (B) is optionally available.
  • Cage
    Cage
    Standard Cage is:
      - 32 = (3.2 m x 1.39 m)
    Optional Cage is available:
      - 24 = (2.4 m x 1.39 m)
  • Landing Gates and Doors
    Landing Gates and Doors
    Falcon's landing gates and doors are compatible and interchangeable with all H48 hoist models. The gates and doors are reliable, flexible and can be adjusted to different kinds of structural conditions. The gates are 1.1 m high and have full height doors of 2.0 m.
  • Mast Section
    Mast Section
    Falcon's mast sections are hot dip galvanised which ensure their long lifetime. One section is 1.5 m tall and weighs only 80 kg. The mast is anchored to the wall with a maximum interval of 12 m.
  • Operation panel
    Operation panel
    Relay control "Stop next landing".
  • Ground station control box
    Ground station control box
    Relay control "Stop next landing".

 

dimensions of SC2032-48 main components 
  • Ground station dimensions
    Ground station dimensions
  • Mast section dimensions
    Mast section dimensions
  • Mast section drawing
    Mast section drawing
  • Cage
    Cage
  • Cage dimensions
    Cage dimensions
    L=2774
  • Vertical full height entrance (exit) door
    Vertical full height entrance (exit) door
    Weight of the door is 151 kg.
  • Exit door with electric-hydraulic operated load ramp
    Exit door with electric-hydraulic operated load ramp
  • Base frame dimensions
    Base frame dimensions
    L=3594 mm
  • Ground enclosure for single cage
    Ground enclosure for single cage
    L=3846 mm, L1=1714 mm, L2=1797 mm
  • Ground enclosure for twin cage
    Ground enclosure for twin cage
    L=3846 mm, L3=2022 mm, L4=1842 mm
  • Double-Leaf swing landing door
    Double-Leaf swing landing door
    Used without pipeline.
  • Location of double-leaf swing gate with exit door
    Location of double-leaf swing gate with exit door
  • Location of double-leaf swing gate with ramp door
    Location of double-leaf swing gate with ramp door
  • Location of sliding landing gate with ramp door
    Location of sliding landing gate with ramp door
  • Horizontal sliding landing gate
    Horizontal sliding landing gate
  • Location of sliding gate
    Location of sliding gate
    A=2450 mm, B=2590 mm
  • Cable guide dimensions
    Cable guide dimensions
  • Cable guides for trolleys single dimensions
    Cable guides for trolleys single dimensions

 

Description and dimensions of the SC2032-48 option components
  • Double cage version
    Double cage version
    The possibility to use two cages at the same time.
  • Mast Crane
    Mast Crane
    The mast is easily assembled with the help of an optional mast assembly crane.
  • Cable Trolley
    Cable Trolley
    The optional cable trolley takes care of smooth movement and prevents damaging of the cable.
  • Manual or Hydraulic Ramp
    Manual or Hydraulic Ramp
    The door can be equipped with a manually or hydraulically operated ramp.
  • Operation panel
    Operation panel
    Operation panel with logic control Unit
     
CapacitySC2032-48
Payload 2000 kg or 24 persons
Speed 36 m / min
Max. lifting height, with anchored mast 200 m (higher mast by request)
Max. lifting height, free standing  6 m (depending on installation)
Max. anchoring distance 12 m (depending on anchor type)
Free mast after topmost anchoring  6 m (depending on installation)
Max. overhang
  • double
  • single

4,5 m
4,5 m
Maximum wind speed
  • during erection and dismantling
  • during operation
  • when cage is at the ground station

12,5 m/s
20,0 m/s
42,0 m/s
Operation temperature −25 – +40 °C
Noise level  < 85 dB(A)
Weights and DimensionsSC2032-48 SingleSC2032-48 Double
Cage floor height from the ground with the hoist at the ground station, min. 395  mm 395  mm
Cage dimensions internal
  • length
  • width
  • height
  • cage weight

3200 mm
1390 mm
2055 mm
1200 kg

3200 mm

1390 mm
2055 mm
1200 kg
Cage door opening
  • width
  • height

1490 mm
2000 mm

1490 mm

2000 mm
Mast section dimensions
  • square mast
  • height
  • mounting bolts
  • rack module

539,5 x 539,5 mm
1508 mm
M18x160/8,8
6 mm


539,5 x 539,5 mm

1508 mm
M18x160/8,8
6 mm

Mast section weight with
  • one rack
  • two rack
80 kg
91 kg
Ground station dimensions
  • length
  • width
  • height
  • weight

3905 mm
2470 mm
2740 mm
1150 kg 

3905 mm
4940 mm
2740 mm
2300 kg
Top drive unit
  • weight
470 kg 470 kg
Electrical Data / CageSC2032-48
Power - lifting motors 2 x 11 kW
Supply voltage 400 V / 50 Hz
Control voltage 48 V / 50 Hz  24 DC
Power consumption 23 kW
Max. starting current 100 A (with FC)
Size and type of the main fuse  63 A / slow
Socket for hand tools 230 V / 10 A
Safety EquipmentSC2032-48
Safety brake (UC-3.0) Red mark
Emergency lowering system Red mark
Final limit switch on the top and bottom ends of the mast Red mark
Functional limit switches on the top and bottom end of the mast Red mark
Safety railing (h=1,10 m) and kick board on the roof Red mark
Emergency stop buttons at the ground station, in the cage and the roof Red mark
Overload detection device Red mark
Residual current device Red mark
Landing door/gate closed, limit switch Red mark
Landing door locking device in closed position, limit switch  Red mark
Cage door closed limit switches Red mark
Cage door locking device in closed position, limit switch Red mark
Service key switch on the roof Red mark
Root hatch closed limit switch Red mark
Lockable service door at the ground station  Red mark
Buffers at the ground station under the cage Red mark
Brakes – spring-loaded disc brake Red mark
Brake torque  250 Nm

SC2032-65VL Technical Data Overview

  • Main Components
  • Technical Data
  • Options

 

Description of the SC2032-65VL main components 
  • SC2032-65VL
    SC2032-65VL
    Scanclimber SC2032-65VL can be equipped with one or two cages. The payload of each cage is 2000 kg or 24 persons.
  • Ground Station
    Ground Station
    Armada Hoists has a light ground station, typically bolted onto a concrete or similar slab. The handedness of cage can be chosen. The standard Armada Hoists ground station is equipped with one front door.
  • Cage
    Cage
    Standard cage size of an Armada Hoist is 3.2 m x 1.5 m.
  • Mast Section
    Mast Section
    Armada Hoist mast sections are hotdip galvanized which ensures their long lifetime. One section is 1.5 m tall and weighs only 133 kg.
  • Drive units control panel
    Drive units control panel
    The Armada hoist is always equipped with a frequency controller (FC). The frequency controlled motor gives smooth starting and stopping with low starting current and less wear and tear – so ensuring an extended lifetime.
  • Safety Brake
    Safety Brake
    The safety brake ensures that even in a complete breakdown of the drive unit, the cage will not fall down. A mechanical, spring-loaded safety brake is a standard safety feature in Armada hoists. It improves safety and reliability of the hoist for everyday use. The long-lasting safety brake is well protected from dirt and dust and is practically maintenance-free.
  • Drive Units
    Drive Units
    Armada 2032-65VL has three 11 kw's lifting motors with a standard speed of 54 m/min.
Technical DataSC2032-65VL
Payload 2000 kg
Cage internal length 3200 mm
Cage internal width x height 1510 x 2040 mm
Speed 54 m/min
Single or twin cage version YES
Lifting motors:
  • Mid-speed 54 m/min
YES
Power supply voltage 400 V / 50 Hz
Top drive lifting unit YES
Overspeed safety device YES
Max. lifting height, with anchored mast 200 m (higher on request)
Anchoring distance Approved to 12 m (21 m on request)
Mast section:
  • height
1,5 m
Operation temperature -25...+40°C

 

Description of the SC2032-65VL option components
  • Landing Gates and Doors
    Landing Gates and Doors
    Different landing gates and doors are available for the Armada Hoist. Most of the Scanclimber manufactured gates or doors are compatible with Armada Hoist. All the gates and floors are equipped with an interlocking system.
  • Ramp Door
    Ramp Door
    Landing level access door can be equipped with a manually or hydraulically operated 700 mm length ramp.
  • Double Cage Version
    Double Cage Version
    The possibility to use two cages at the same time.
  • Mast Crane
    Mast Crane
    The mast is easily assembled with the help of an optional mast assembly crane.
  • Ramp Door
    Ramp Door
    A ramp is available as an option for Armada hoists. The back door of the cage can be equipped with a manual ramp to enable access to the building.
  • Feel free to leave us a message if you have any requests, questions or feedback and we'll get back to you as soon as possible.
    Add bold text
    captcharefresh

    Powered by ChronoForms - ChronoEngine.com

Mail
Contact